Passion Flower Copper Fountain

Made in the UK by Gary Pickles

As with all of our copper fountains, the Passion Flower fountain comes complete with a heavy base, to enable it to sit either on a plinth in a pond, or pebble pool.

Connection of the pump is from below the base, so all pipes and fittings can be discreetly concealed.

Passion Flower copper fountain

Specifications

Height: 60cm

Pump required: 200/300 litres per hour at 60cm head height

Connection: 13mm hose on underside of base

Copper Water Sculpture & Garden Ornaments

Original designs by Gary Pickles. All processes are carried out entirely by hand.

Entirely self taught, Gary’s skills have been honed over many years, to produce some remarkably beautiful pieces of work, reflecting the natural plant forms that have been his inspiration.

 
In a Modest workshop in East Yorkshire, England, Gary has been producing his range of Copper Water Sculpture since 1999. This was at a time when there were only a handful of such artists. Since then, his pieces have been widely copied and some inferior, low quality imports have arrived on the market, as the popularity of copper in the garden increased. Gary though, has stayed steadfast in his resolve to produce very high quality pieces, in the best materials and from original designs.

Through a process of annealing and hammering, very lifelike forms can be made from a plain sheet of copper plate. Where appropriate, all key joints are made using a specialist, hard solder, which makes a union stronger than the material itself. This enables the creation of a piece of sculpture, which looks light and fragile, but is in fact very resilient.

The copper is intentionally left in its natural state, so as to benefit from the constant changing patinas, which build up over many decades. This process allows the piece to blend seamlessly into a garden environment, integrating, without dominating.